Posted by Admin on May, 17, 2012

One might have come across a situation, where, the door of the garage creates a problem in opening even after continuous pressing of the remote button. If that’s the case then it’s time for you to shift from the old rusty door spring to the new Torsion Springs.

Problems With Old Garage Doors:
One of the major problems with old garage doors are the springs that break off from the door, which in turn leads to the jamming of the garage doors. That’s when one realizes it’s time to change from the old pairs of springs to the new ones. The best suggested option is the use of Automotive Springs; here Torsion Springs are among the best suggested ones. These Stainless Steel Springs are used for balancing and maintaining the weights of the heavy garage doors and help in the easy functioning of these doors.

Why Torsion Springs For Garage Doors?
Torsion Springs are among the various types of Stainless Steel Springs. These Stainless Steel Springs are made with proper precision and are known for their flexibility and load bearing capacity. The Automotive Springs can easily handle the heavy weight of the door panels. It is always suggested to get professional help in the changing of the Torsion Springs, as the springs can prove to be dangerous, if left loose. Known as high Compression Springs, these are quick to lift the load.

Residential garage doors may require one or two such springs while commercial or industrial ones require 2-4 springs installed in linear, diplex, triplex or mixed systems. Depending on the type of garage door usage, buyers need to figure out the right diameter and inside diameter before buying the torsion spring.

Check For Other Related Problems:
While changing the Automotive Springs for the garage, also check for any other related problems. sThis is so because once the Stainless Steel Springs are fixed, it will be difficult to locate and work on any other similar problems. Check for the proper spacing of the garage doors before installing the Torsion Springs. The problems of spacing will lead to not closing of the doors. This is one major problem faced by user if the spacing is not checked properly. Also check for the panels of the doors before installation.

With all the problems checked, the garage doors are perfectly ready for the installation of new Torsion Springs for their easy and efficient working. One can Buy Garage Door Torsion Springs that make the garage doors semi or fully automatic, thus saving the time and energy of opening the doors manually.

This entry was posted on May, 17, 2012 at 16 : 26 pm and is filed under Torsion Springs. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required) (will not be published)